Always rotate your rotary knob (hand wheel) left or perhaps counter-clockwise. since turning ones rotary knob on the opposite direction against the tension It causes your current timing to change your own settings. Except When issuing thread a good needle stuck at the trunk, but turning your wheel to be able to proper hand Just in case not exceed 180 degrees. mesin jahit
Before sewing location of the shoe (presser foot) Just in case always dibawah.Menjahit spot above your current presser foot will probably cause your own thread tangled and also spull (bobbins) jammed
Replace needle regularly every 16 hours associated with work with by the EMPLOY of blunt needles can produce damage to help the machine or perhaps stitching. Direkomendasaikan singular work with needles Singer for that Singer sewing machine.
Using your own right bobbins intended for sewing equipment anda.Bobbin class 66, class 15 and class 15 J looks like. However, ones USE involving bobbins The idea do not match will certainly cause damage to your sewing machine.
Giving oil / oil from an regular basis, via using / dripping oil inside area sufficient lifeboats (bobbin case) along with sticks the needle. intended for products 15 Cl, directly sewing machine, You\’ll shed some drops connected with oil on the steering wheel (hand wheel) with area meeting / friction by the body of an machine along with in the course of lubangan : holes with the bodywork.
When ones information instructs for you to receive an machine oil, as well as you\’re with the machine every night out we recommend to help required oil immediately after a week. whether or not an individual operate the machine soon after a good week will be wise for you to provide the oil soon after a good month. in addition to While with the machine immediately after the month, giving your current oil every 3 months.
If your own information does not instruct for you to provide your current engine oil, It means you happen to be already with the machine oiled by the factory along with do not need to provide oil again. But You will give 2- 3 drops of oil because the they will certainly not damage your current machine but The idea adds towards the maintenance of the machine. Do not utilize the lack involving good quality oil. wise MAKE USE OF singular oil Singer.
We recommend to do an general check-up / maintenance servicing your machine every 3-4 months to become stored and inside good road.
Here i submit ones Circumstances That often occur at the USE regarding sewing equipment in addition to The way to overcome them.
Sewing machine jammed:
Sewing machine jams due for you to tangled as well as stuck for the needle hook (stem needle)
How in order to overcome that:
Remove ones thread plus the opening and closing of a lifeboat
Turn your current hand wheel (head / rotary knob) machine back and forth by hand.
Take the tangled thread along with clean your own area along with lifeboats and also rods stuck needles
Sewing machine is actually noisy:
Sewing machine is noisy or loud usually caused coming from oil or maybe oil does not stick at the needle rod. your happens because the oil or even oil quality is actually not good. Therefore, always operate the sewing machine oil of good quality.
The fix is usually ??to clean the needle rod from the rest — your rest of the oil in addition to drops / apply new oil.
Noisy sewing machine needle can be caused via faulty as well as poor quality. your own fix replace your own needle using a new needle associated with good quality.
Stitches jump – jump:
Results stitching jump – jump (inconsistent) occurs because of Circumstances at the needle or maybe timing (tension) thread.
Problems at the Needle:
Your needle blunt or perhaps damaged. How you can cope by the new replacing your own needle connected with good quality in addition to size suitable in order to Any type of suture material.
The needle can be not installed correctly. Improper installation of the needle causes your own needle incase not Pick out up your own thread inside bobbin This caused the seam jump – jump. your fix replace your current needle along with attach your needle very well Equally instructed.
For Ailments in timing the possibility associated with timing your machine has been disturbed / changed as well as Specifications for you to end up being reset settings.
Needles usually are broken:
Often broken needle is usually caused because of its lack of good quality needle, improper installation, the needle hit the shoe, needle plate or maybe a good lifeboat (bobbin case) along with thick material The item does not match your current size of your needle.
How to be able to overcome :
Change your own needle from the needle connected with good quality.
Attach your needle according guidebook
Adjust your size of an needle for the thickness of the seam. Eg pertaining to thick fabrics similar to denim you need to UTILIZE a good needle size 16. throughout contrast for the thin material similar to satin or perhaps cotton you should work with an needle size 9 — 11. with regard to EMPLOY needles that are too large will certainly damage your fabric and Develop a seam That is less good.
Check that this installation of your shoe, needle plate along with lifeboats